Problem with examples / microstrip / MSL_Losses

How to use openEMS. Discussion on examples, tutorials etc

Moderator: thorsten

Post Reply
wxp
Posts: 1
Joined: Thu 21 Jul 2022, 15:31

Problem with examples / microstrip / MSL_Losses

Post by wxp » Thu 21 Jul 2022, 15:35

Hi, I can run the example MSL_Losses successfully, but when I change the f_start and f_stop to 2e9 and 3e9, then the Excitation signal length becomes: 42123 timesteps (5.7296e-09s) .This is too long, why it occurs?

Post Reply